Populära länkar


Alla varumärken

Produkten har lagts
till i din varukorg.
Produkten har lagts
till i din varukorg.


Echomax EM230BR Radarreflektor 24m2

 Gratis fraktalternativ
2 995 kr

Köp & prenumerera

För automatisk leverans av den här produkten välj intervall nedan och tryck på köpknappen. Du får varan levererad omgående och sedan samma datum varje period tills du väljer att avsluta prenumerationen. Läs mer om prenumerationer.

Ingen prenumeration
Varje månad
Varannan månad
Varje kvartal
  • Beskrivning

Echomax radarreflektor med reflekterande aluminiumskivor i ett polyetylenhölje.
De symmetriskt placerade aluminiumskivorna ger högsta möjliga radareko i alla vinklar.
Mastmontering eller hissas upp i fall.

Reflektorarea: 24m2
Höjd: 595mm
Diameter: 245mm
Vikt: 2,5 kg
Godkännande: ISO9729-1/ISAF SOLAS



Suitable for vessels 9 metres and above. Robust Polyethylene case available in white, orange, yellow, red, green, or black. . The EM230 model has been successfully tested by QinetiQ to ISO 8729-1999, and meets RORC,ORC,ISAF 2012/13 and WCC requirements of 10M2.

Echomax EM230 has now been allocated a NATO Stock No.5840-99-742-6193 following the adoption and use of the Echomax  EM230 by the UK Military Forces and others throughout the World. Used by the US Navy for target and other uses.

The EM230 has Ships Wheel Mark certification for life boats and rescue craft as from December 2012 and copies of the BABT- TUV Module B certificate can be seen and downloaded from the Certificates section of this website.

Mast, halyard or deck bracket mount.

@+/-3°-24m² maximum - Stated Performance Level (SPL) +/- 3° 4.7m²

BR version  is Restyled case with fixing centres of 545mm, being direct replacement for the Firdell Blipper 210-7 utilising existing bracket installation on mast. Same response as the EM230.

Now available with brown PE case for classic boat owners.



Diameter 245mm

fixing centres 545mm

Height 595mm

Wt 2.3kgs


Echomax may be fitted in any position around the mast (i.e fore or aft).

Hypothetical figures on mast shadow may be viewed here

Utilising Echomax stainless steel mast brackets (available separately) fit reflector as high as possible on the mast, using Monel or stainless steel rivets (3/16 x 1/2" 4.8 x 12.7mm). To avoid electrolytic action use zinc chromate paste between bracket and mast or closed cell foam tape. Firstly fix top bracket to mast in the required position, measure distance vertically between centres, mark position of lower bracket then drill and fix. Use two stainless steel hexagonal bolts 8mm dia x 30mm long to fix Echomax to the mounting brackets

  • Produktfakta