|
Produkten har lagts
till i din varukorg. ![]()
Produkten har lagts
till i din varukorg. Futaba T6K-V2 8-Channel 2.4GHz Computer Radio Set
2 290 kr
Köp & prenumerera För automatisk leverans av den här produkten välj intervall nedan och tryck på köpknappen. Du får varan levererad omgående och sedan samma datum varje period tills du väljer att avsluta prenumerationen. Läs mer om prenumerationer.
The Futaba 6K-V2 is a high-performance 8 channel 2.4Ghz radio set. Updated Version 2 offers 8 channels of control! Two additional channels Channels 7/8 are used through the R3006SB receiver's S.BUS/S.BUS2 ports Allow for expansions or adding accessories Can be assigned to any of the four switches or VR dial Are included in Sub Trims, End Points, Reverse, Failsafe, Servo Monitor and Trainer Expanded Flight Modes (Fly Mod) in multicopter programming Priority — toggle through five different values assigned to flight modes on an assigned channel Matrix — up to nine combinations using two, 3-position switches for controlling gimbals Vibration alerts with timer functions and Throttle Integrate SBS-01C current sensor and SBS-01V voltage sensor compatible The included R3006SB receiver has six standard PWM ports plus S.Bus and S.Bus2 ports. You can use S.Bus as the main link to your servos or a combination of the ports. The S.Bus2 port allows bi-directional communication with T-FHSS Futaba air transmitters and the use of a wide array of telemetry sensors.
T-FHSS Air: R3006SB & R3008SB (Note, R304SB, R304SB-E T-FHSS Surface system receivers does not work with T6K) S-FHSS: R2008SB, R2006GS & R2106GF (No telemetry functions)
T-FHSS Air 2.4G system Dual antenna diversity S.BUS, S.BUS2 system Power Requirement: 4.8 - 7.4V Batteries Battery F/S Voltage: It's set-up with the transmitter Size: 43.1 x 25 x 8.8 mm Weight: 8.5 g
|